How much does 22 squares of siding cost in Springdale, AR?
| Typical total$719 per square | $15,821 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $7,911 – $31,642 |
| Labor portion55% of the job — this is the part that moves by city | $8,702 |
| Material portion45% — bought at national prices | $7,120 |
| Carpenters pay near Springdaleabout $26/hr · Fayetteville-Springdale-Rogers, AR metro | $53,570/yr |
| U.S. mean for the same tradeSOC 47-2031 | $65,630/yr |
| Versus the national pricetrade pay here runs −18.4% against the U.S. mean | −$1,779 |
Notes
- Where the number comes from. The national price for a siding replacement is $800 per square — installed siding pricing published for 2026, $4–$16 per ft² depending on material. Labor is about 55% of that. Carpenters near Springdale, AR average $53,570 a year against a U.S. mean of $65,630 — a factor of 0.816 — so the labor half is scaled by that and the material half is not. Source: BLS OEWS May 2025 for the Fayetteville-Springdale-Rogers, AR metro area, SOC 47-2031.
- Why the city matters, not just the state. Trade pay moves inside a state as much as it does between states. Crews do not commute across a state to bid a job, and materials ship at national prices either way — so a metro wage is the honest input here and a state average quietly rounds four different cities into one number.
- What is in the price: tear-off of one layer, house wrap, the siding, J-channel and corner posts, fasteners, disposal and labor.
- What is not: sheathing replacement found once the old siding is off, insulation added behind the new siding, window and door trim replacement, and permits. These are the lines that turn a $15,821 quote into a $19,777 invoice, so ask about each one before signing.
- Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a per-unit average.
a siding replacement in Springdale, AR
$15,821 is the typical number, and three bids on the same scope normally land between $7,911 and $31,642.
That is $1,779 less than the same job priced at the national average.
Why the city changes the number
About 55% of this job is labor — $8,702 of the $15,821 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.
Carpenters near Springdale average $53,570 a year, against a U.S. mean of $65,630. That is a factor of 0.816, so the labor half is scaled by it and the material half is not.
Source: BLS OEWS May 2025 for the Fayetteville-Springdale-Rogers, AR metro area, SOC 47-2031.
What the quote should include
The lines that turn a quote into an invoice
Ask about each of them before you sign. On a job this size they are the difference between $15,821 and something a quarter higher.
Use it as a bid check, not a quote
This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.
If a bid lands outside $7,911 – $31,642, that is not automatically wrong — but it is the question worth asking out loud.
Nearby sizes
- How much does 22 squares of siding cost in Brooklyn Park, MN?
- How much does 22 squares of siding cost in Racine, WI?
- How much does 22 squares of siding cost in Medford, OR?
- How much does 22 squares of siding cost in Hammond, IN?
- How much does 18 squares of siding cost in Springdale, AR?
- How much does 14 squares of siding cost in Springdale, AR?
Read more
- Do You Need House Wrap Under Vinyl Siding? — Yes, and Here Is WhyVinyl siding leaks by design — it has to breathe and drain. The wrap behind it is what keeps the wall dry, and how it is lapped decides whether it works.
- Vinyl Siding Rattling in the Wind — Loose Locks, Not Loose NailsSome movement is designed in. A rattle is not movement, it is two pieces that were meant to be engaged and are not.
- Why Vinyl Siding Buckles — It Was Nailed Too TightAlmost every wavy vinyl wall is an installation fault, and it is the same fault every time. The panels were fastened as though they were wood.