How much does 14 squares of siding cost in Florence, SC?
| Typical total$726 per square | $10,163 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $5,081 – $20,326 |
| Labor portion55% of the job — this is the part that moves by city | $5,590 |
| Material portion45% — bought at national prices | $4,573 |
| Carpenters pay near Florenceabout $26/hr · Florence, SC metro | $54,580/yr |
| U.S. mean for the same tradeSOC 47-2031 | $65,630/yr |
| Versus the national pricetrade pay here runs −16.8% against the U.S. mean | −$1,037 |
Notes
- Where the number comes from. The national price for a siding replacement is $800 per square — installed siding pricing published for 2026, $4–$16 per ft² depending on material. Labor is about 55% of that. Carpenters near Florence, SC average $54,580 a year against a U.S. mean of $65,630 — a factor of 0.832 — so the labor half is scaled by that and the material half is not. Source: BLS OEWS May 2025 for the Florence, SC metro area, SOC 47-2031.
- Why the city matters, not just the state. Trade pay moves inside a state as much as it does between states. Crews do not commute across a state to bid a job, and materials ship at national prices either way — so a metro wage is the honest input here and a state average quietly rounds four different cities into one number.
- What is in the price: tear-off of one layer, house wrap, the siding, J-channel and corner posts, fasteners, disposal and labor.
- What is not: sheathing replacement found once the old siding is off, insulation added behind the new siding, window and door trim replacement, and permits. These are the lines that turn a $10,163 quote into a $12,704 invoice, so ask about each one before signing.
- Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a per-unit average.
a siding replacement in Florence, SC
$10,163 is the typical number, and three bids on the same scope normally land between $5,081 and $20,326.
That is $1,037 less than the same job priced at the national average.
Why the city changes the number
About 55% of this job is labor — $5,590 of the $10,163 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.
Carpenters near Florence average $54,580 a year, against a U.S. mean of $65,630. That is a factor of 0.832, so the labor half is scaled by it and the material half is not.
Source: BLS OEWS May 2025 for the Florence, SC metro area, SOC 47-2031.
What the quote should include
The lines that turn a quote into an invoice
Ask about each of them before you sign. On a job this size they are the difference between $10,163 and something a quarter higher.
Use it as a bid check, not a quote
This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.
If a bid lands outside $5,081 – $20,326, that is not automatically wrong — but it is the question worth asking out loud.
Nearby sizes
- How much does 14 squares of siding cost in Hobbs, NM?
- How much does 14 squares of siding cost in Waipahu, HI?
- How much does 14 squares of siding cost in Muskogee, OK?
- How much does 14 squares of siding cost in Columbia Heights, DC?
- How much does 18 squares of siding cost in Florence, SC?
- How much does 22 squares of siding cost in Florence, SC?
Read more
- Do You Need House Wrap Under Vinyl Siding? — Yes, and Here Is WhyVinyl siding leaks by design — it has to breathe and drain. The wrap behind it is what keeps the wall dry, and how it is lapped decides whether it works.
- Vinyl Siding Rattling in the Wind — Loose Locks, Not Loose NailsSome movement is designed in. A rattle is not movement, it is two pieces that were meant to be engaged and are not.
- Why Vinyl Siding Buckles — It Was Nailed Too TightAlmost every wavy vinyl wall is an installation fault, and it is the same fault every time. The panels were fastened as though they were wood.