How much does 14 squares of siding cost in Butte, MT?
| Typical total$760 per square | $10,638 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $5,319 – $21,276 |
| Labor portion55% of the job — this is the part that moves by city | $5,851 |
| Material portion45% — bought at national prices | $4,787 |
| Carpenters pay near ButteBLS does not publish a metro figure for carpenters near Butte, MT, so this is the Montana state average, SOC 47-2031 | $59,640/yr |
| U.S. mean for the same tradeSOC 47-2031 | $65,630/yr |
| Versus the national pricetrade pay here runs −9.1% against the U.S. mean | −$562 |
Notes
- Where the number comes from. The national price for a siding replacement is $800 per square — installed siding pricing published for 2026, $4–$16 per ft² depending on material. Labor is about 55% of that. Carpenters near Butte, MT average $59,640 a year against a U.S. mean of $65,630 — a factor of 0.909 — so the labor half is scaled by that and the material half is not. Source: BLS does not publish a metro figure for carpenters near Butte, MT, so this is the Montana state average, SOC 47-2031.
- This one falls back to a wider average. BLS did not publish a metro-level wage for this trade near Butte, MT, so the figure above is a state average. It is still the right order of magnitude, but a local bid carries more weight here than it would in a large metro where the survey has more responses.
- What is in the price: tear-off of one layer, house wrap, the siding, J-channel and corner posts, fasteners, disposal and labor.
- What is not: sheathing replacement found once the old siding is off, insulation added behind the new siding, window and door trim replacement, and permits. These are the lines that turn a $10,638 quote into a $13,297 invoice, so ask about each one before signing.
- Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a per-unit average.
a siding replacement in Butte, MT
$10,638 is the typical number, and three bids on the same scope normally land between $5,319 and $21,276.
That is $562 less than the same job priced at the national average.
Why the city changes the number
About 55% of this job is labor — $5,851 of the $10,638 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.
Carpenters near Butte average $59,640 a year, against a U.S. mean of $65,630. That is a factor of 0.909, so the labor half is scaled by it and the material half is not.
Source: BLS does not publish a metro figure for carpenters near Butte, MT, so this is the Montana state average, SOC 47-2031.
What the quote should include
The lines that turn a quote into an invoice
Ask about each of them before you sign. On a job this size they are the difference between $10,638 and something a quarter higher.
Use it as a bid check, not a quote
This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.
If a bid lands outside $5,319 – $21,276, that is not automatically wrong — but it is the question worth asking out loud.
Nearby sizes
- How much does 14 squares of siding cost in Houma, LA?
- How much does 14 squares of siding cost in Benton, AR?
- How much does 14 squares of siding cost in Derry Village, NH?
- How much does 14 squares of siding cost in North Providence, RI?
- How much does 18 squares of siding cost in Butte, MT?
- How much does 22 squares of siding cost in Butte, MT?
Read more
- Do You Need House Wrap Under Vinyl Siding? — Yes, and Here Is WhyVinyl siding leaks by design — it has to breathe and drain. The wrap behind it is what keeps the wall dry, and how it is lapped decides whether it works.
- Vinyl Siding Rattling in the Wind — Loose Locks, Not Loose NailsSome movement is designed in. A rattle is not movement, it is two pieces that were meant to be engaged and are not.
- Why Vinyl Siding Buckles — It Was Nailed Too TightAlmost every wavy vinyl wall is an installation fault, and it is the same fault every time. The panels were fastened as though they were wood.